Sony CDP-C265 - SECTION 3. ELECTRICAL BLOCK CHECKING; S Curve Check; E-F Balance Check; RF Level Check

Playing CDs
ae eee ee eae
Locating a Specific Disc
You can locate any disc before or while playing a disc.
DISC 1-5 DISC CHECK C> DISC SKIP
To locate Press
The next disc DISC SKIP while playing a disc
A specific disc directly DISC 1-5
A disc while checking the DISC CHECK while the disc
labels tray is open. The disc tray turns
to show you each disc label.
When the disc you want comes
in front of you, press [> to
start playing.
A disc by scanning the first | DISC CHECK before you start
track of each disc for 10 playing while the disc tray is
seconds closed. When you find the disc
you want, press [> to start
playing.
‘
ww
You can extend the playing time during scanning the
discs
Press DISC CHECK repeatedly until the playing time
you want (10, 20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Notes
¢ When you press DISC CHECK, the play mode
automatically changes to ALL DISCS continuous play
mode.
¢ When you've opened the disc tray by pressing
EX-CHANGE, you cannot use the DISC CHECK function.
a ee eee
Locating a Specific Track or a
Point in a Track
You can quickly locate any track while playing a disc
using the Ki /D>1 (AMS: Automatic Music Sensor)
buttons or number buttons. You can also locate a
specific point in a track while playing a disc.
Number buttons >10
To enter “0,” use button 10.
Example: To play track number 30
Press >10 first, then 3 and 10.
Number buttons
>10
>
Kid /> > M.SCAN
<</>>
To locate Press
The next or Dl repeatedly until you find the
succeeding tracks track
The current or 1X1 repeatedly until you find the
preceding tracks track
A specific track Number button of the track
directly
A track by scanning M.SCAN before you start playing.
each track for 10 When you find the track you want,
seconds (music press > to start playing.
scan) [ff]
A point while bP (forward) or 4 (backward) and
monitoring the sound hold down until you find the point
A point quickly by = <<4/® and hold down until you
observing the display find the point. You will not hear the
during pause sound during the operation.
¢ When you directly locate a track numbered over 10
Press >10 first, then the corresponding number buttons. |
xe) You can extend the playing time during music scan ri
Press M.SCAN repeatedly until the playing time you
want (10, 20 or 30) appears in the display. Each time you
press the button, the playing time changes cyclically.
Note
If “77” appears in the display, the disc has reached the end
while you were pressing PP. Press <4 or KI to go back.