EasyManua.ls Logo

Sony CDP-CE500 - Specifications; CD Player and USB Specifications; General and Accessory Specifications

Sony CDP-CE500
24 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sony Corporation Printed in Malaysia
(1)
Specifications
CD player section
Laser Semiconductor laser (λ =
780 nm)
Emission duration:
continuous
Frequency response 2 Hz to 20 kHz ± 0.5 dB
Dynamic range More than 90 dB
Harmonic distortion Less than 0.006%
Laser Diode Properties Emission Duration:
Continuous
Laser Output: Less than
44.6 μW
* This output is the value measurement at a
distance of 200 mm from the objective lens
surface on the optical pick-up block with 7 mm
aperture.
USB section
Supported bit rate MP3 (MPEG 1 Audio
Layer 3): 32 kbps – 320
kbps, VBR
WMA: 48 kbps – 192 kbps
AAC: 48 kbps – 320 kbps
Sampling frequencies MP3 (MPEG 1 Audio
Layer 3): 32 kHz/
44.1 kHz/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
USB port Maximum current:
500 mA
Outputs
General
Power requirements 120 V AC, 60 Hz
Power consumption 16 W
Dimensions (approx.) 430 mm × 110 mm ×
400 mm
(w/h/d) (17 in × 4 3/8 in ×
15 3/4 in) incl. projecting
parts
Mass (approx.) 5.2 kg (11 lbs 1 oz)
Supplied accessories
Audio cord Red and white (1)
Remote commander RM-ASU100 (1)
Battery R6 (size-AA) (2)
Design and specifications are subject to change
without notice.
Jack type Maximum
output level
Load
impedance
ANALOG
OUT
Phono
jacks
2 V (at 50
kilohms)
Over 10
kilohms
DIGITAL
OUT
OPTICAL
Optical
output
jack
–18 dBm Wave
length:
660 nm
Standby power consumption: 0.3 W
Halogenated flame retardants are not used in the
certain printed wiring boards.

Other manuals for Sony CDP-CE500

Related product manuals