Need help?Do you have a question about the Sony CDP-CE525 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Number of Discs | 5 |
| Frequency Response | 2 Hz - 20 kHz |
| Signal-to-Noise Ratio | 110 dB |
| Digital Output | Coaxial |
| Dynamic range | 100 dB |
| Output Voltage | 2V |
| Disc format | CD |
| Dimensions (W x H x D) | 430 x 100 x 320 mm |
| Line output | 2V |
| DAC | 1-bit |
| CD Mechanism | Unknown |
Details on power requirements, dimensions, mass, and included accessories.
Technical data for laser output, frequency response, SNR, dynamic range, distortion, and output levels.
Instructions for checking AC leakage and performing safety checks on exposed metal parts.
Alerts about critical safety components and the importance of using specified replacement parts.
Instructions for checking laser diode emission and focus search operation.
Details on ADJ mode, its functions, and checking LEDs and buttons.
Methods for activating and using the aging mode to check mechanism operations.
Steps for removing the unit's case and front panel.
Procedures for checking S-curve and RF signal waveforms for proper operation.
Methods for performing E-F balance checks with and without a remote commander.
Detailed list of pin names and their functions for the CXA2585Q digital signal processor.
Detailed list of pin names and their functions for the CXP84648-019Q master control IC.
Comprehensive list of electrical components for the BD board.
To Next Page
