Classifying DiscsAccording to
Artist Name (Artist File)
You can classify discs by storing Artist Names into the
player and assigning them to each disc. Each Artist
Name can use up to 20 characters. Once you assign an
Artist Name to a disc, you can er_joy Continuous,
Shuflle, or Repeat Play within discs assigned same
Artist Name and you can search for the desired disc
easily. You call also store a category name instead of an
Artist Nalne. Up to 200 Artist Names can he stored.
CONTINUE SHUFFLE CHECK CLEAR MENU/NO JOG
6
7
Push the JOG dial to select the character.
Tile selected character lights up, and the flashing
cursor appears to indicate tile next space to be
input.
To make a correction
Press CLEAR and begin again by inputting the correct
characters.
Repeat steps 5 and 6 to input more characters.
See also "Labeling discs on tile player" on page 23
for details.
8 Press YES to store tile Artist Name.
/
i I ii i o_
........................,q,-,-4,-,-,_ 4 o o
o _d
_--- , --_ _
ARTISTMODE E::>- _ AMS
Storing the Artist Name
1 Press MENU/NO.
2 Turn the JOG dial until "ART.NAME IN?" appears
in the display.
3 Push the JOG dial.
"New Artist" flashes.
4 Push the JOG dial.
The flashing cursor (_) appears.
5
Turn tile JOG dial tmtil tile desired character
appears in the display.
The cursor disappears and the first space for tile
Artist Name flashes.
As you turn the JOG dial clockwise, tile characters
appear in tile following order. Turn the JOG dial
counterclockwise to go in reverse order.
(space) AB C D EF G H IJ K LMN O P Q RSTU
VWXYZabcde fghij klinnopqrstuvw
xyz0123456789' /,.():!?&+<> -";
#$%(_*
Changing the Artist Name
1 Follow steps 1 to 3 in "Storing the Artist Name" on
this page.
2 Turn tile JOG dial until the artist name you want to
change appears in the display, then push tile JOG
dial.
3
Turn tile 0<:1<1AMS D,f:>0dial to move tile cursor to
tile position you want to change.
When tile cursor position is on the character, tile
character flashes, and when tile cursor position is
on a blank space, the cursor (t..a) appears in the
display.
Tochange characters
Turn the JOG dial tmti] tbe desiled character appears in
the display.
To add characters
Push the JOG dial. The new blank space appears next to
the selected character, then turn the JOG dial tmtil the
desired character appears in the display.
To erase characters
Press CLEAR. Tim selected character disappears.
4 Repeat step 3 to change i-nore characters.
5 Press YES to store tile Artist Name.
(continued)
27Us
To Next Page
Loading...
