Tochange the character type quickly while inputting
characters
Press CHAR in step 4 above. The rhararter on the rursor
changes to tile first character of each character type. Each
time you press CHAR, tile character type changes as
fiAlows:
-_A _ a----------+0 ------+ ' _ (space) 3
If you make a mistake while inputting the
character(s)
To correct a character that was input
1 Press 14141or I)1)1 until tile cursor moves to tile
illCOrl"ec{ character.
DISC
SONYKE TS
ALL DISCS I_l
cD1 I I
2 Press DEL to delete tile incorrect character.
DISC N { /
SONYH;TS
ALL DISCS
3 Input tile correct character.
DISC
SONYK!SS
ALL DISCS
To correct the character currently being input
1 Press DEL to delete tile inrorrert rhararter.
2 Input tile correct character.
To insert a character(s) between the input characters
Press _ o1"I_1_1until tile rursor moves next to tile
point you want to insert, and enter the character(s).
Storing Custom File
Information Using a Keyboard
You can store the Disc Name for each disc, one by one,
using an IBM-coinpatible PC keyboard* (not supplied).
* Tile keyboald's power consun-lption must be 120n-lAo1"
less.
Keyboardjack
1 Connect a keyboard to the keyboard jack on the
fixmt panel of the player.
2 After selecting the desired disc on the player, press
the Enter key.
3 Input the desired characters, then press the Enter
key to store the information.
"_) You can delete all characters of a selected item
While holding down tile Shift key, press tile Delete key.
Notes
• If the rursor keys do not work rorrertly and you rannot
complete tile task using tile keyboard, disconnect tile
keyboard then reconnect it to tile p]ayer and try again.
• If the keyboard is not a USA model (shown below), the
characters may be input differently fi'om those on tile keys.
C3C_; I ]C3
26 us
To Next Page
Loading...
