Controlling Another CD Player
(Advanced Mega Control)
This unit can control a second CD player (see
"Connecting another CD player" on page 8). Even
when a second CD player is connected, the controls on
both of the units will f\mction. When you press the
play button on either unit, the operating player stops
and the idle player starts. Make sure that "2rid
DETECTED" appears in this player's display after
turning on both players. Note that, you cannot operate
all the fimetions of the second CD player (e.g. selecting
the desired album or a track whose track number is 99
or over with nuinber buttoi-ls, etc.).
The controls indicated in the illustration below are
effbctive while the MEGA CONTROL button is lit.
To operate the master player, press MEGA CONTROL
so that tile MEGA CONTROL button goes off_ and to
operate the second player, press MEGA CONTROL so
that the MEGA CONTROL button lights up.
Play mode buttons
(CONTINUE/SHUFFLE/ MEGA
PROGRAM/REPEAT) CONTROL
E>
MENU/NO JOG
n • _c]<] AMS D[DI
3
.ql41/IN_ __
_CDO
CD CD CD
CD CD CD
000
000
000
oOc:D
CD CD CD
CD CD CD
_COMMAND MODE
selector
Press MEGA CONTROL on this player.
The MEGA CONTROL button and "2nd" in the
display light up. The display shows the current
disc number or Disc Name of the second player.
A In It7 -Il-
l U -_ Zr. Z_D
Current discnumber or the DiscName
Select the desired play mode.
To program tracks, use the controls on the second
player.
Press _ on this player to start playing.
The play starts and the display shows the current
disc, track numhers, and the playing time of the
U'ack.
While the MEGA CONTROL button is lit, you can
control the second player with the controls on this
player.
To control the master player again
Press MEGA CONTROL. The MEGA CONTROL button goes
off and you can control the master player.
To control the second player directly using the supplied
remote =
Set CD1/2/3 on the remote to CD3 which is the same position
as the COMMAND MODE selector on the rear panel of the
second player.
30 us
To Next Page
Loading...
