Sony CDP-CX455 - Page 25

Labeling discs using the remote []
DISC r
DEL
NAME EDIT
/SELECT
/1_1 --
1 Press DISC.
000
C) O0
OOC
OOC
OOC
c:) c:D_
_CDCD
CK3CK?
SPACE
-- CHAR
Number
buttons
ENTER
-- CLEAR
2 Press the nui-_lber button of tile disc you want to
label, then press ENTER.
3 Press NAME EDIT/SELECT.
The flashing cursor (_) appears.
4
Press NAME EDIT/SELECT to find the desired
character type.
Each time you press the button, tile character type
changes cyclically as follows:
Selected AB --_ Selected ab
_ (capital letters) (slnall letters) _
Selected 12 (nuinbers) ,
To select a symbol, select the capital or small letter
type. Tile selected character type appears in the
display.
O
C[?1
Character type
I
S
To input a letter, press the number button
corresponding to the desired letter (indicated
beside each number button).
The cursor disappears and the first space tot the
Disc Name flashes.
Each time you press the button, tile letter changes
cyclically among the ones indicated beside the
button.
To input symbols, press the number button 1
repeatedly until tile desired symbol appears in the
display.
d5Oe5
Example:
Characters
assigned to
each number
button
To select the letter E
Press tile number button 3 twice.
D +E *F --
Press 3. Press 3.
Press 3,
To insert a space, press SPACE once.
To input a number, press NAME EDIT/SELECT
twice to change the character type, then press the
desired number button.
6 Press _ to select the character.
The selected character lights up, and the flashing
cursor appears at the next space to be input.
You can also go to tile next space by pressing other
ntl Illber btlttoI1s.
7 Repeat Steps 4 through 6 to input illore characters.
8
Press ENTER to store tile Disc Name.
The Disc Name lights up in tile display.
DISC
S0NY.IWS
A D
CD1
Repeat Steps I through 8 to assign Disc Names to
other discs.
(continued)
25us