Sony CMD-MZ5 - Page 74

74
GB
Data services
You can send and receive faxes and data when the phone is connected to
the optional EasyCom or PC Card accessory (see also the operating
instructions of the accessory for use with the CMD-MZ5).
Speech then fax
Switch the Speech then Fax setting to On to make a phone call and
then send a fax. When the phone is not connected to the EasyCom or
PC Card accessory, Off should be selected.
Select Data services from the Call settings menu. Select Speech and
then Fax. Use the Jog Dial to select On or Off.
Serial speed
Select Data services from the Call settings and then select Serial speed.
Tip
• Select Automatic for automatic detection of the Serial speed. In order
for the phone to detect the Serial speed correctly, enter an “AT”
command, whereafter the phone responds with “OK”. For a list of
“AT” commands, please refer to the operating instructions supplied
with the PC Card or EasyCom accessory.
CALL SETTINGS < CALL TIME, COST <
PREFERENCES , SECURITY