To Next Page
E
Eric NelsonSep 2, 2025
What does OUT OF SCAN RANGE mean on my Sony CPD-E250?
- CcatherineburkeSep 2, 2025
If your Sony monitor displays 'OUT OF SCAN RANGE', check that the video frequency range is within that specified for the monitor.
What does OUT OF SCAN RANGE mean on my Sony CPD-E250?
If your Sony monitor displays 'OUT OF SCAN RANGE', check that the video frequency range is within that specified for the monitor.
How to fix a fuzzy picture on my Sony Monitor?
If the picture on your Sony monitor appears fuzzy, try the following: * If the monitor is receiving signals over 1280 × 1024 resolution, lower the contrast or set the computer to a lower resolution. This monitor has a high luminance mode, so small characters may not appear clearly. * Adjust the brightness and contrast. * Degauss the monitor. * Adjust for minimum moire.
How do I get my Sony CPD-E250 out of power save mode?
If your Sony Monitor displays 'MONITOR IS IN POWER SAVE MODE', try these steps: * Press any key on the computer keyboard or move the mouse. * Check that the computer’s power is “on.” * Check that the graphic board is completely seated in the proper bus slot.
What to do if my Sony Monitor says NO INPUT SIGNAL?
If your Sony monitor displays 'NO INPUT SIGNAL', verify the following: * Ensure the video signal cable is properly connected and all plugs are firmly seated. * Check that the HD15 video input connector’s pins are not bent or pushed in. * Confirm that the computer is powered on. * Check that the graphic board is completely seated in the proper bus slot.
How to fix a Sony CPD-E250 with no picture?
If your Sony monitor isn't displaying a picture, here are a few things to check: * Ensure the power cord is properly connected. * Verify the power switch is in the “on” position. * Make sure the video signal cable is correctly connected and all plugs are firmly seated. * Inspect the HD15 video input connector for bent or pushed-in pins. * Confirm that the computer is powered on. * If the computer is in power saving mode, press any key or move the mouse. * Check that the graphic board is completely seated in its slot. * Try using the Self-diagnosis function.
How to fix red or blue shadows on letters and lines on my Sony Monitor?
If letters and lines on your Sony monitor show red or blue shadows at the edges, adjust the convergence.
Why is the color on my Sony CPD-E250 not uniform?
Color uniformity on your Sony monitor may be affected if equipment generating a magnetic field, like a speaker, is placed nearby, or if the monitor's direction changes. Degauss the monitor to resolve this.
Important warnings and guidelines for connecting the power cord.
Recommendations for placing the monitor safely and effectively.
Advice on transportation, tilt-swivel use, and general protection.
Solutions for no picture, flickering, fuzziness, ghosting, and centering issues.
Resolving "OUT OF SCAN RANGE" and "NO INPUT SIGNAL" messages.
Procedures for diagnosing monitor issues via power indicator status.
General| Refresh Rate | 75 Hz |
|---|---|
| Dot Pitch | 0.24 mm |
| Brightness | 120 cd/m² |
| Input Connectors | 15-pin D-sub |
| Horizontal Refresh Rate | 30-96 kHz |
| Vertical Refresh Rate | 50-160 Hz |
| Aspect Ratio | 4:3 |
| Display Type | CRT |
| Screen Size | 21" |
| Max Resolution | 1600 x 1200 |
