Changing
the
Input
Level
of
the
Sound
from
Connected
Components
Distortion may occur when you listen to a
component connected to the TV/VIDEO jacks
on the rear panel, or
to
the AUDIO IN
jack
on
the front panel. Distortion is not a malfunction
and will depend on the component connected.
To prevent distortion, reduce the input level on
the unit.
1 Press FUNCTION
+/-
repeatedly until
"TVNIDEO"
or "AUDIO" appears
in
the
front panel display.
2 Press SYSTEM MENU.
3 Press "'/-" repeatedly until
"ATTENUATE" appears
in
the front
panel display, then press
0 or-+.
4 Press "'/-" to select a setting.
•
"ATT
ON": You can attenuate the input
level. The output level
is
changed.
•
"ATT
OFF": Normal input level.
5 Press
0.
The setting is made.
6 Press SYSTEM MENU.
The system menu turns off.
Using
the
Sleep
Timer
You can set the system to turn
off
at a preset
time, so you can fall asleep listening
to
music.
You can preset the time in 1 or 1a-minute
increments.
Press SLEEP.
Each time you press SLEEP, the minutes display
(the remaining time) changes by
Ia minutes.
When you set the sleep timer, "SLEEP" flashes
in the front panel display.
To
check
the
remaining
time
Press SLEEP once.
To
change
the
remaining
time
Press SLEEP repeatedly to select the desired
time.
To
cancel
the
sleep
timer
function
Press SLEEP repeatedly until
"SLEEP
OFF"
appears
in
the front panel display.
To
set
the
sleep
timer
using
the
system
menu
1 Press SYSTEM MENU.
2 Press "'/-" repeatedly until "SLEEP"
appears
in
the front panel display, then
press
0 or-+.
3 Press "'/-" to select a setting.
The minutes display (the remaining time)
changes by 1a minutes.
imJ
• You can select the remaining time by pressing
the number buttons. In this case, you can preset
the time in I-minute increments.
4 Press
0.
The
setting is made and "SLEEP" flashes in
the front panel display.
5 Press SYSTEM MENU.
The system menu turns off.
•
o
-
::T
C'D
...
85
GB
To Next Page