Sony DCR-IP5 Network Function User Manual

141
“Memory Stick
” Operations
Superimposing a still image in the “Memory Stick” on an image
– MEMORY MIX
To change the still image to be superimposed
Press –/+ on the right lower corner before step 6.
To cancel MEMORY MIX
Press OFF to return to PAGE1.
Notes
•You cannot use the MEMORY MIX for moving pictures recorded on “Memory Stick”s.
•When the overlapping still image has a large amount of white, the thumbnail image of
the picture may not be clear.
Image data modified on your computer or shot with other equipment
You may not be able to play back modified images with your camcorder.
When you select M. OVERLAP
You cannot change the still image or the mode setting.
During recording
You cannot change the mode setting.
To record the superimposed image as a still image
Press PHOTO deeper in step 8 (You should set PHOTO REC in to TAPE in the
menu settings beforehand).
3,4
5
6
FN
MEM
M
I X
+–
+–
2
1
100–0001
+–
MEM MIX
MCCAM
LUMI
OVER-
LAP
OFF OK
MCCAM
CHROM
CAMCM
CHROM
M. LUMI
100–0001
+–
MEM MIX
OFF OK
+–
M. LUMI
100–0001
+–
MEM MIX
OFF OK
+–
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
P
O
W
ER
Still image

Sony DCR-IP5 Network Function Specifications

General

Brand	Sony
Model	DCR-IP5 Network Function
Category	Camcorder
Language	English