143
“Memory Stick
” Operations
Superimposing a still image in the “Memory Stick” on an image
– MEMORY MIX
To change the still image to be superimposed
Press –/+ on the right lower corner before step 6.
To cancel MEMORY MIX
Press OFF to return to PAGE2.
Notes
•You cannot use MEMORY MIX for moving pictures recorded on “Memory Stick”s.
•When the overlapping still image has a large amount of white, the thumbnail image of
the picture may not be clear.
Image size of still pictures
Image size is automatically set to 640 × 480.
Image data modified with your computers or shot with other equipment
You may not be able to play back modified images with your camcorder.
During recording
You cannot change the mode setting.
When recording images on a “Memory Stick” using the MEMORY MIX
The PROGRAM AE does not work. (The indicator flashes.)
The “Memory Stick” supplied with your camcorder stores 20 images
– For M. CHROM: 18 images (such as a frame) 100-0001~100-0018
– For C. CHROM: two images (such as a background) 100-0019~100-0020
Sample images
Sample images stored in the “Memory Stick” supplied with your camcorder are
protected (p. 167).
3,4
5
6
FN
MEM
M
I
X
+–
+–
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
POWER
2
1
100–0001
+–
MEM MIX
MCCAM
LUMI
OFF OK
MCCAM
CHROM
CAMCM
CHROM
M. LUMI
100–0001
+–
MEM MIX
OFF OK
+–
M. LUMI
100–0001
+–
MEM MIX
OFF OK
+–
Still image
To Next Page
Loading...
Need help?
General