Sony DCR- TRV15 - Frame by Frame

Frame by frame recording - Cut recording
You can make a recording with a stop motion animated effect using cut recording. To
create this effect, alternately move the subject a little and make a cut recording. We
recommend that you use a tlipod, and operate tile camcorder using tile Remote
Commander after step 6.
(1) Press MENU to display the menu in standby mode.
(2) Turn the SEL/PUSH EXEC dial to select _, then press the diah
(3) Turn the SEL/PUSH EXEC dial to select FRAME REC, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(5) Press MENU to erase the menu display.
The FRAME REC indicator lights up.
(6) Press START/STOP to start cut recording. The camcorder makes a recording
for about six Dames, and returns to recording standby.
(7) Move the sut_ject, and repeat step 6.
MENU
To cancel the cut recording
• Set FRAME REC to OFF in the menu settings.
• Set the POWER switch to OFF (CHG), VCR, or MEMORY (DCR TRV17 only).
Notes on cut recording
• The last recorded cut is longer than other cuts.
• The proper remaining tape time is not indicated if you nse this flmction continnously.
56