103
“Memory Stick” Operations
Selecting the still image size
You can select image size 1152 × 864 or 640 × 480 (When the POWER switch is set to
CAMERA or VCR, the image size is automatically set to 640 × 480.).
The default setting is 1152 × 864.
The POWER switch should be set to .
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select STILL SET in
, then press EXEC (p. 171).
(4) Select IMAGESIZE, then press EXEC.
(5) Select a desired image size, then press EXEC.
The indicator changes as follow:
1152
640
Memory capacity of still images
Recorded images are compressed in JPEG format before being stored in memory. The
memory capacity of still images varies depending on the selected image quality mode
and image size. Details are shown in the table below.
1152 × 864 image size
Image quality Memory capacity
FINE About 500 KB
STANDARD About 200 KB
640 × 480 image size
Image quality Memory capacity
FINE About 150 KB
STANDARD About 60 KB
Selecting the quality and size of image data
34
RET.
EXEC
Rr
EXIT
EXIT
1152
MEM SET 1
STILL SET
BURST
QUALITY
IMAGESIZE
1152 × 864
640 × 480
REMAIN
12
RET.
EXEC
Rr
MEM SET 1
STILL SET
BURST
QUALITY
IMAGESIZE
OFF
To Next Page
Loading...
Need help?
General