168
Changing the menu settings
Menu items are displayed as the following icons:
MANUAL SET
CAMERA SET
VCR SET
LCD/VF SET
MEM SET 1
MEM SET 2
CM SET
TAPE SET
SETUP MENU
OTHERS
Selecting the mode setting of each item z is the default setting.
Menu items differ depending on the position of the POWER switch.
The screen shows only the items you can operate at the moment.
Icon/item
MANUAL SET
PROGRAM AE
P EFFECT
FLASH MODE
FLASH LVL
WHT BAL
AUTO SHTR
Mode
——
——
z ON
ON
AUTO
AUTO
HIGH
z NORMAL
LOW
——
z ON
OFF
Meaning
To suit your specific shooting requirement (p. 58)
To add special effects like those in movies or on
the TV to images (p.54, 68)
To fire the flash (optional) regardless of the
brightness of the surroundings
To fire the flash (optional) before recording to
reduce the red-eye phenomenon regardless of the
brightness of the surroundings
To fire the flash (optional) automatically
To fire the flash (optional) before recording to
reduce the red-eye phenomenon
To make the flash (optional) level higher than
normal
To use the normal setting
To make the flash (optional) level lower than
normal
To adjust the white balance (p. 48)
To automatically activate the electronic shutter*
when shooting in bright conditions
To not automatically activate the electronic
shutter* even when shooting in bright conditions
POWER
switch
* The electronic shutter is the function used to adjust the shutter speed automatically.
Notes on FLASH MODE and FLASH LVL
•You cannot adjust FLASH MODE and FLASH LVL if the external flash (optional) is
not compatible.
•The FLASH MODE details differ depending on the flash (optional) you use.
To Next Page
Loading...
Need help?
General