46
Note
You cannot record still images on the “Memory Stick” during following operations
(The indicator flashes):
– End search
– Wide mode
– During fading in with BOUNCE
– MEMORY MIX
“Memory Stick”
See page 99 for details.
Still images
•The image size will be 640 × 480.
•If the POWER switch is set to CAMERA, image quality cannot be changed. Images
will be recorded with image quality as set when the POWER switch is set to
MEMORY.
•When recording with higher image quality, use of Memory Photo recording is
recommended (p. 106).
During and after recording still images on the “Memory Stick”
Your camcorder continues recording on the tape.
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
To record still images on the “Memory Stick” during tape recording
You cannot check an image on the screen by pressing PHOTO lightly. The image when
you press PHOTO deeply will be recorded on the “Memory Stick.”
Title
You cannot record the titles.
Self-timer recording
During recording standby, you can record still images on the “Memory Stick” with the
self-timer. See page 47 for details.
Recording still images on “Memory Stick” during tape recording
standby or tape recording
To Next Page
Loading...
Need help?
General