16
Set the date and time settings when you use your camcorder for the first time. “CLOCK
SET” will be displayed each time that you set the POWER switch to CAMERA or
MEMORY unless you set the date and time settings.
If you do not use your camcorder for about three months, the date and time settings
may be released (bars may appear) because the built-in rechargeable battery installed in
your camcorder will have been discharged (p. xx).
Set the area, the summer time, year, month, day, hour and then the minute, in that
order.
(1) Set the POWER switch to CAMERA or MEMORY, then press MENU to display
the menu settings.
(2) Press v/V on the control button to select
, then press z or B.
(3) Press v/V on the control button to select CLOCK SET, then press zor B.
(4) Press v/V on the control button to adjust the desired area (where you are),
then press z.
(5) Press v/V on the control button to select whether or not the time is summer
time, then press z.
Select NO if the time is not summer time. Select YES if it is.
(6) Press v/V on the control button to adjust the desired year, then press z.
The year changes as follows:
(7) Set the month, day and hour by pressing v/V on the control button and
pressing z.
(8) Set the minute by pressing v/V on the control button and pressing z by the
time signal. The clock starts to move.
(9) Press MENU to make the menu settings disappear.
Step 2 Setting the date and time
1995 T · · · · t 2001 T · · · · t 2079
To Next Page
Loading...
