38
Self-timer recording
You can record still images on tapes with the self-timer. You can also use the Remote
Commander for this operation.
(1) Press (self-timer) in the standby mode. The (self-timer) indicator appears
on the screen.
(2) Press PHOTO deeper.
Self-timer starts counting down from 10 with a beep sound. In the last
two seconds of the countdown, the beep sound gets faster, then recording
starts automatically.
To cancel self-timer recording
Press (self-timer) so that the indicator disappears from the screen while your
camcorder is in the standby mode. You cannot cancel the self-timer recording using the
Remote Commander.
Note
The self-timer recording mode is automatically canceled when:
– Self-timer recording is finished.
– The POWER switch is set to OFF (CHG) or VCR.
Recording a still image on a tape – Tape Photo recording
PHOTO
2
PHOTO
(self-timer)
To Next Page
Loading...
