27
Automation Operation
• {ALLCUTS} for the Channel Fader and MTR
Fader Cuts for all Channels and the Aux Returns.
• {ALLBUSASSIGNS} for Program and MTR Bus
Assign buttons for all Channels and the Aux
Returns.
• {ALLPANS} for the Channel and MTR Pans for
all Channels.
• {ALLFADERS} for the Channels, MTRs, Aux
Returns, Bus Masters and Program Faders.
4 The rest of this procedure follows that described
earlier in this section so please refer to the
beginning of ‘Automating Sections of Controls’.
Footswitch, Audition & Auto
General
The FOOT SW, AUDITION and AUTO functions
allow the settings for controls in automation record to
be written as automation data over specified periods.
• FOOT SW allows the drop-in time period to be set
using a footswitch.
• AUDITION allows the drop-in time period to be set
manually using the {SAFE} button.
• AUTO allows the drop-in time period to be set by
specifying timecode points.
To Next Page
Loading...
Need help?
General
