~
To
make
a
connection
with
the
last
connected
Bluetooth
device
by
operating
this
unit
1
Press
the
multi
function
button.
The indicator (blue) and
indicator (red) start flashing at
the same time, and the unit
performs the connection
operation for about 5 seconds.
Note
When listening to music with this unit, a
Bluetooth connection cannot be made
with the multi function button.
To
call
1
Use
the
buttons
on
your
mobile
phone
when
making
a
call.
If
no dial tone is heard on this unit,
press and hold the multi function
button for about 2 seconds.
Tip
You can call in the following way,
depending on the Bluetooth mobile
phone. Refer to the manual supplied with
your mobile phone on operating details.
- When not communicating, you can call
using the voice-dial function by
pressing the multi function button. •
- You can call the last dialed number by
pressing the multi function button for
about 2 seconds.
To
receive
a
call
When an incoming call arrives, a
ring tone will be heard from the
unit.
1
Press
the
multi
function
button
on
the
unit.
The ring tone differs in the
following ways, depending on
your mobile phone.
- ring tone set on the unit
- ring tone set on the mobile
phone
- ring tone set on the mobile
phone only for Bluetooth
connection
Note
If
you received a call by pressing the
button on the Bluetooth mobile phone,
some Bluetooth mobile phones may have
handset use priority. In this case, set to
talk with the unit by pressing and holding
the multi function button for about 2
seconds, or by operating the Bluetooth
mobile phone. For details, refer to the
manual supplied with your Bluetooth
mobile phone.
To
adjust
the
volume
Press the VOL + or - button.
Tips
• You cannot adjust the volume when not
communicating.
• Volume level for calling and listening
to music can be set independently.
To
terminate a
call
You can end a call by pressing the
multi function button on the unit.
To
stop
use
1
Terminate
Bluetooth
connection
by
the
Bluetooth
mobile
phone.
2
Press
and
hold
the
POWER
button
for
about
3
seconds
to
turn
off
the
power.
The indicator (blue) and
indicator (red) light up together,
and the unit turns off.
Continued 17
us
To Next Page
Loading...
