Markers are displayed. The markers are not recorded.
Off:
No marker is displayed.
Note
The markers are displayed when the mode dial is set to (Movie) or when
shooting movies.
You cannot display markers when using [Focus Magnifier].
The markers are displayed on the monitor or viewfinder. (You cannot output the
markers.)
[123] How to Use Using shooting functions Recording movies
Marker Settings (movie)
Sets the markers to be displayed while shooting movies.
1. MENU → (Custom Settings) → [ Marker Settings] → desired setting.
Menu item details
Center:
Sets whether or not to display the center marker in the center of the shooting
screen.
Off / On
Aspect:
Sets the aspect marker display.
Off / 4:3 / 13:9 / 14:9 / 15:9 / 1.66:1 / 1.85:1 / 2.35:1
Safety Zone:
Sets the safety zone display. This becomes the standard range that can be
received by a general household TV.
Off / 80% / 90%
Guideframe:
Sets whether or not to display the guide frame. You can verify whether the subject
To Next Page
Loading...
