4. Select your desired geographic location, and then press .
5. Select a setting item using the up/down side of the control wheel or by turning
the control wheel, then press in the center.
6. Set [Daylight Savings], [Date/Time], and [Date Format] using the
up/down/left/right sides, then press in the center.
Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
7. Repeat steps 5 and 6 to set other items, then select [Enter] and press
in
the center.
To cancel the date and time setting procedure, press the MENU button.
Note
If the date and time setting is cancelled halfway, the setting screen for the date
and time appears every time you turn on the camera.
[20] How to Use Confirming the operation method Confirming the operation method
Using the control wheel
You can select setting items by turning or pressing the top/bottom/right/left side of
the control wheel. Your selection is determined when you press on the center
of the control wheel.
The DISP (Display Setting) is assigned to the top side of the control wheel. You
can assign selected functions to the left/right/bottom side of the control wheel or to
in the center, and to the rotation of the control wheel.
During playback, you can display the next/previous image by pressing the right/left
To Next Page
Loading...
