The camera can send a recording command to an external
recorder/player.
The camera is sending a recording command to an external
recorder/player.
Off:
The camera is not able to send a command to an external recorder/player to
start/stop recording.
Note
Available for external recorders/players compatible with [ REC Control].
When [ TC Output] is [Off], [ REC Control] is set to [Off].
Even when is displayed, the external recorder/player may not work
properly depending on the settings or status of the recorder/player. Check if the
external recorder/player works properly before use.
[210] How to Use Changing settings Setup menu
4K Output Sel. (movie)
You can set how to record movies and perform HDMI output when your camera is
connected to 4K-compatible external recording/playback devices, etc.
1. Turn the mode dial to (movie).
2. Connect the camera to the desired device via an HDMI cable.
3. MENU→ (Setup)→[ 4K Output Sel.]→desired setting.
Menu item details
Memory Card+HDMI:
Simultaneously outputs to the external recording/playback device and records on
the camera's memory card.
HDMI Only(30p):
Outputs a 4K movie in 30p to the external recording/playback device without
recording on the camera's memory card.
To Next Page
Loading...
