Off:
Does not apply [Gamma Disp. Assist].
Auto:
Displays movies with an [S-Log2→709(800%)] effect when the gamma set in
[Picture Profile] is [S-Log2]. [Gamma Disp. Assist] is not applied when the gamma
is set to other than [S-Log2].
S-Log2→709(800%):
Displays movies with an S-Log2 gamma reproducing contrast equivalent to
ITU709(800%).
Note
When [Gamma Disp. Assist] is set to [Auto] during playback, the picture is
displayed based on the current gamma setting in [Picture Profile] instead of
auto-detecting the gamma value of the movie.
[Gamma Disp. Assist] is not applied to movies when displayed on a TV or
monitor connected to the camera.
[193] How to Use Changing settings Setup menu
Volume Settings
Sets the sound volume for movie playback.
1. MENU → (Setup) → [Volume Settings] → desired setting.
Adjusting the volume during playback
Press the bottom of the control wheel while playing back movies to display the
operation panel, then adjust the volume. You can adjust the volume while listening
to the actual sound.
[194] How to Use Changing settings Setup menu
Audio signals
To Next Page
Loading...
