Sony DSC-RX10M3 - Accessing the Help of Remote Camera Control; Connecting the Product to a Computer

Download and install the software by accessing the following URL:
Windows:
http://www.sony.co.jp/imsoft/Win/
Mac:
http://www.sony.co.jp/imsoft/Mac/
[266] How to Use Using a computer Using the software
Accessing the Help of Remote Camera Control
Windows:
[Start] → [All Programs] → [Remote Camera Control] → [Remote Camera Control
Help].
For Windows 8, start [Remote Camera Control], and right-click the title bar to
select [Remote Camera Control Help].
Mac:
Finder → [Applications] → [Remote Camera Control], and select [Help] from the
menu bar → [Remote Camera Control Help].
[267] How to Use Using a computer Connecting this product and a computer
Connecting the product to a computer
1. Insert a sufficiently charged battery pack into the product, or connect it to a
wall outlet (wall socket) using an AC Adaptor AC-PW20 (sold separately).
2. Turn on the product and the computer.
3. Check from (Setup) that [USB Connection] is set to [Mass Storage].
4. Connect the product and your computer using the micro USB cable
(supplied) (A) .