The color tones of the image displayed on the
monitor/the viewfinder look unnatural.
[Gamma Disp. Assist] has been activated. Set [Gamma Disp. Assist] to [Off].
[Gamma Disp. Assist] is not working properly. The [Picture Profile] settings are
cancelled when you select other than [Off] for [Picture Effect], even if [Gamma]
is set to [S-Log2]. Therefore, the color tones are not displayed correctly when
[Gamma Disp. Assist] is set to [Auto]. To display the color tones properly, set
[Gamma Disp. Assist] to [Off].
[320] Troubleshooting Troubleshooting Shooting still images/movies
The image is blurred.
Make sure that [SteadyShot] is set to [On].
The picture was taken in a dark location without the flash, resulting in camera-
shake. The use of a tripod or the flash is recommended. [Hand-held Twilight]
and [Anti Motion Blur] in [Scene Selection] are also effective in reducing blur.
[321] Troubleshooting Troubleshooting Shooting still images/movies
The monitor darkens after a short period of time passed.
If you do not operate the product for a certain period of time, the product
switches to the power-save mode. The product exits power-save mode when
you perform operations such as pressing the shutter button halfway.
[322] Troubleshooting Troubleshooting Shooting still images/movies
The flash takes too long to recharge.
To Next Page
Loading...
