[316] Troubleshooting Troubleshooting Shooting still images/movies
No images appear on the monitor.
If you shoot images at waist height when [FINDER/MONITOR] has been set to
[Auto], the monitor will turn off due to the reaction of the eye sensor. Set
[FINDER/MONITOR] to [Monitor(Manual)].
[317] Troubleshooting Troubleshooting Shooting still images/movies
[Finder/Monitor Sel.] does not work even though it has
been assigned to a certain key using [Custom
Key(Shoot.)] or [Custom Key(PB)].
[FINDER/MONITOR] is currently set to [Auto]. Set [FINDER/MONITOR] to
[Viewfinder(Manual)] or [Monitor(Manual)].
[318] Troubleshooting Troubleshooting Shooting still images/movies
The image is whitish (Flare)./Blurring of light appears on
the image (Ghosting).
When pointing the lens toward the strong light source, excessive light enters
the lens and the image may come out white (flare) or extraneous light (ghost
images) may appear on the image, but this is not a malfunction.
Set up the composition so that you shoot images while avoiding backlit
condition.
[319] Troubleshooting Troubleshooting Shooting still images/movies
To Next Page
Loading...
