Enables the upload function.
Off:
Disables the upload function.
Communication status screen display
: Standby. No images are to be sent.
: Upload standby
: Connecting
: Uploading
: Error
Note
Eye-Fi cards are only sold in certain countries/regions.
For more information on Eye-Fi cards, please contact the manufacturer or
vendor directly.
Eye-Fi cards can be used only in the countries/regions where they were
purchased. Use Eye-Fi cards in accordance with the law of the
countries/regions where you purchased the card.
Eye-Fi cards are equipped with a wireless LAN function. Do not insert an Eye-Fi
card into the product in locations in which their use is prohibited, such as on an
airplane. When an Eye-Fi card is inserted into the product, set [Upload Settings]
to [Off]. When the upload function is set to [Off], the indicator will be
displayed on the product.
Power save mode will not function during uploading.
If (error) is displayed, remove the memory card and reinsert it, or turn the
product off and then on again. If the indicator appears again, the Eye-Fi card
may be damaged.
Wireless LAN communication may be influenced by other communication
devices. If the communication status is poor, move closer to the access point to
be connected.
This product does not support Eye-Fi “Endless Memory Mode.” Before using an
Eye-Fi card, be sure that “Endless Memory Mode” is turned off.
[196] How to Use Changing settings Setup menu
Tile Menu
Selects whether to always display the first screen of the menu when you press the
To Next Page
Loading...
