18
Setting the date and time
1
Mode dial
Set the mode dial to .
• To change the date and time, set the
mode dial to SET UP, select [Clock
Set] in
2
(Setup 2) (pages 51 and
142), and perform the procedure
from step
.
• You can also carry out this operation when the
mode dial is set to P, S, A, M, SCN,
or
.
POWER
2
2004
/:
/
11
12 00
AM
OK
Cancel
Clock Set
D/M/Y
M/D/Y
Y/M/D
Press POWER to turn on the
power.
The POWER lamp (green) lights up and
the Clock Set screen appears on the LCD
screen.
3
2004
/:
/
11
12 00
AM
OK
Cancel
Clock Set
D/M/Y
M/D/Y
Y/M/D
Select the desired date display
format with / on the control
button, then press .
Select from [Y/M/D] (year/month/day),
[M/D/Y] (month/day/year) or [D/M/Y]
(day/month/year).
• If the rechargeable button battery (page 144),
which provides the power for saving the time
data, ever becomes low, the Clock Set screen
will appear again. When this happens, reset the
date and time, by starting from step above.
To Next Page
Loading...
