22
Inserting and removing a “Memory Stick”
1
2
1
Open the battery/“Memory
Stick”/CF card cover.
Slide the cover in the direction of the
arrow.
2
Terminal
side
Label side
Insert the “Memory Stick”.
Insert the “Memory Stick” all the way in
until it clicks as shown in the illustration.
• Whenever you insert a “Memory Stick”, push
it as far as it can go. If you do not insert it
correctly, a proper recording or playback may
not be carried out.
3
Access lamp
Close the battery/“Memory
Stick”/CF card cover.
To remove the “Memory Stick”
Open the battery/“Memory Stick”/CF card
cover, then push the “Memory Stick” to
pop it out.
• Whenever the access lamp is lit, the
camera is recording or reading out
an image. Never remove the “Memory
Stick” or turn off the power at this time.
The data may be corrupted.
To Next Page
Loading...
