Chapter 3 Using the Unit as a Player in an Editing System
50 (GB) Chapter 3 Using the Unit as a Player in an Editing System
Settings on the Editing Control Unit
For details on the settings of the Editing Control Unit,
refer to “Adjusting Edit Timing” on page 56 (GB).
Settings on the DSR-45A/45AP (player) and a
recorder
Switch DSR-45A/45AP Recorder
REMOTE/LOCAL REMOTE REMOTE
REMOTE RS-422A
For details, refer to the instruction manual of the recorder.
About reference video signals
•In order to provide stable video and audio signals for
analog editing, it is necessary for the built-in time
base corrector (TBC) to operate correctly. To ensure
this, input a reference video signal synchronized with
the video signal to the VIDEO IN REF.IN connector.
•Set EXT SYNC on the VIDEO SET menu to ON.
Connections for a Cut Editing System
To Next Page
Loading...
