138
Self-timer MPEG movie recording
You can record images on “Memory Stick”s with the self-timer. You can also use the
Remote Commander for this operation.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the right (unlock) position.
(2) Press FN and select PAGE2.
(3) Press SELFTIMER in standby.
The
(self-timer) indicator appears on the screen.
(4) Press START/STOP.
Self-timer starts counting down from 10 with a beep. In the last two seconds of
the countdown, the beep gets faster, and recording starts automatically.
To stop the count down
Press START/STOP.
To restart the countdown, press START/STOP again.
To cancel self-timer recording
Press SELFTIMER so that the (self-timer) indicator disappears from the screen. You
cannot cancel self-timer recording using the Remote Commander.
Note
Self-timer recording is automatically canceled when:
– Self-timer recording is finished.
– The POWER switch is set to OFF (CHARGE) or VCR.
Recording moving pictures on “Memory Stick”s
– MPEG movie recording
2
FN
START/STOP
To Next Page
Loading...
Need help?
General