37
Recording
– Basics
Checking the recording
— END SEARCH/EDITSEARCH/Rec Review
EDITSEARCH
You can search for the next recording start point.
(1) In standby, press FN to display PAGE1 (p. 22).
(2) Press MENU, then set EDITSEARCH to ON in
(p. 186).
(3) Hold down the 7/– · + side of EDIT. The recorded section is played back.
+ : to go forward
7/– : to go backward
Release 7/– · + to stop playback. If you press START/STOP, re-recording begins from
the point you released 7/– · +. You cannot monitor the sound.
Rec Review
You can check the last recorded section.
(1) In standby, press FN to display PAGE1 (p. 22).
(2) Press MENU, then set EDITSEARCH to ON in
(p. 186).
(3) Press the 7/– side of EDIT momentarily .
The section you have stopped most recently will be played back for a few seconds, and
then your camcorder will return to standby. You can monitor the sound from the
speaker or headphones.
To Next Page
Loading...
Need help?
General