27
Recording
– Basics
Adjusting the brightness of the LCD screen
(1) When you set the POWER switch to CAMERA, press FN and select PAGE2.
When you set the POWER switch to VCR, press FN to display PAGE1 (p. 22).
When you set the POWER switch to MEMORY, press FN and select PAGE3.
(2) Press LCD BRT. The screen to adjust the brightness of the LCD screen appears.
(3) Adjust the brightness of the LCD screen using –/+.
– : to dim
+ : to brighten
(4) Press OK to return to PAGE1/PAGE2/PAGE3.
To return to FN
Press EXIT.
LCD screen backlight
You can change the brightness of the backlight. Select LCD B.L. in the menu settings
when using the battery pack (p. 187).
Even if you adjust LCD BRT or LCD B.L.
The recorded picture will not be affected.
Recording a picture
1
2,3
FN
LCD
BRT
LCD BRT
– +
OK
OPEN
the bar indicator
To Next Page
Loading...
Need help?
General