Sony Handycam DCR-PC101 User Manual

156
To prevent accidental erasure of important images, you can protect selected images.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the right (unlock) position.
(2) Press INDEX to display the index.
(3) Press - MARK. The screen to protect the image appears.
(4) Press the image you want to protect. The “-” appears on the protected
image.
To return to FN
Press EXIT.
To cancel image protection
Press the image you want to cancel image protection in step 4 again. The “-”
disappears.
Note
Formatting erases all information on the “Memory Stick,” including the protected
image data. Check the contents of the “Memory Stick” before formatting.
If the write-protect switch on the “Memory Stick” is set to LOCK
You cannot carry out image protection.
Preventing accidental erasure
– Image protection
2
INDEX
3,4
123
456
EXIT RET.
- MARK
1 / 40
123
456
EXITDEL MARK - MARK
T t
-
2 / 40
Tt
- MARK

Sony Handycam DCR-PC101 Specifications

General

Brand	Sony
Model	Handycam DCR-PC101
Category	Camcorder
Language	English