Therefore, it may take some time before music file registration is completed.
You want to turn off the Wi-Fi (wireless LAN) function but
do not know how.
Select [Wired Setup] in [Network Settings] – [Internet Settings]. Wired LAN is activated and
the Wi-Fi (wireless LAN) function turns off. To re-activate the Wi-Fi (wireless LAN) function,
select [Wireless Setup] in the [Internet Settings] menu.
The external hard disk drive is not recognized.
The HDD AUDIO PLAYER is compatible with the ext4 and FAT file systems. If the external
hard disk drive has a different file system, format it using the Format External HDD function
of the HDD AUDIO PLAYER. If you cannot format it, check the following:
Check that the USB cable used to connect the external hard disk drive is connected firmly and is not
damaged. The connection may also become unstable depending on the type of USB cable being
used. In this case, try another USB cable.
Turn off the HDD AUDIO PLAYER and then remove the external hard disk drive. Connect the external
hard disk drive again and then turn on the HDD AUDIO PLAYER.
If the external hard disk drive is used with bus power, the connection may be unstable. In this case,
use the external hard disk drive with an external power supply.
Some music files are not transferred.
Transfer of music files may be cancelled because the hard disk drive you specified is full.
The audio file format may not be compatible with the HDD AUDIO PLAYER. Music files that
have file extensions not supported by HAP Music Transfer or the HDD Audio Remote
application installed on your smartphone or tablet cannot be transferred to the HDD AUDIO
PLAYER.
The read attributes of some files or folders may be not permitted.
To Next Page
Loading...
