Removing the external hard disk drive safely (Remove
External HDD Safely)
You can safely remove external hard disk drives connected to the EXT port on the rear panel of
the HDD AUDIO PLAYER.
1. Select [Settings] - [HDD Settings] in the Home screen.
2. Select [Remove External HDD Safely].
A message confirming the safe removal appears on the screen.
3. Select [OK].
4. Disconnect the external hard disk drive.
Note
If an error occurs, disconnect the external hard disk drive while the HDD AUDIO PLAYER is
in the standby mode.
Be sure to disconnect the external hard disk drive while the HDD AUDIO PLAYER is in the
standby mode or perform the [Remove External HDD Safely] function. Otherwise, the data
may be damaged.
If no external hard disk drive is connected, [Remove External HDD Safely] is disabled and
grayed out in step 2.
Using the DSEE function
When the DSEE (Digital Sound Enhancement Engine) function is set to [Auto] (factory default
setting), the HDD AUDIO PLAYER offers natural and expansive sound by restoring both high-
frequency signals and fine fade-out sound that is likely to be lost by compression in compressed
audio sources, or restoring fine fade-out sound that is likely to be lost by quantization in PCM
audio sources with lossless compression.
The left figures are images of sound without using the DSEE function, and the right figures are
images of sound using the DSEE function.
To Next Page
Loading...
