16
HCD-GS10/GS30DAB
Contents of “BD Errors”
Error display example
D 0 02 09 01
1 234
1 It indicates the error history number
0 to 4: The error history number 0 indicates the newest error.
2 It indicates the error content
01: The focus servo cannot lock-in.
02: GFS is not good (NG).
03: The startup time exceeds the specified period of time (time
over)
04: The focus servo is unlocked continuously.
05: Q code cannot be obtained within the specified period of
time.
06: The tracking servo cannot lock-in.
07: Blank disc
3 It indicates the processing during which the trouble has
occurred.
01: The CD SHIP mode processing is in progress.
02: The POWER OFF processing is in progress.
03: The INITIALIZE processing is in progress.
04: The optical pick-up system (= optical unit + BD board)
is in the stop state.
05: The STOP operation is in progress.
06: The startup processing is in progress.
07: The TOC read-in processing is in progress.
08: The SEARCH operation is in progress.
09: The PLAY operation is in progress.
0A: The PAUSE operation is in progress.
0B: The PLAY – MANUAL SEARCH operation is in
progress.
0C: The PAUSE – MANUAL SEARCH operation is in
progress.
4 It indicates the operation of the processing during which the
trouble has occurred.
It indicates the step number of each processing specified by
3. Because the numbers of steps are different in each
processing, this number can be different in each processing.
To Next Page
Loading...
