Sony HCD-GS30DAB - Other Operations; Presetting Radio Stations

5
HCD-GS10/GS30DAB
Other Operations
Creating your own CD program
(Program Play)
1 Press CD
Ȯ
to select the CD function.
2 Press PLAY MODE
ȭ
repeatedly until “PGM” appears
while the player is stopped.
3 Press Ã/Ñ (or
ø
/
Þ
on the unit)
ȵ
repeatedly until the desired track or le number
appears.
When programing MP3 les, press
+/ˋ
ȯ
repeatedly to select the desired folder, and then select
the desired le.
Selected track or le number
4 Press ENTER
ȸ
to add the track or le to the
program.
5 Repeat steps 3 through 4 to program additional
tracks or les, up to a total of 15 tracks or les.
6 To play your program of tracks or les, press à (or
CD ā on the unit)
Ȯ
.
e program remains available until you open the disc
tray. To play the same program again, select the CD
function, and press à (or CD ā on the unit)
Ȯ
.
To cancel Program Play
Press PLAY MODE
ȭ
repeatedly until “PGM”
disappears while the player is stopped.
To delete the last track or le of the program
Press CLEAR
Ⱥ
on the remote while the player is
stopped.
To view program information, such as total
track number of the program
Press DISPLAY
Ȭ
repeatedly.
Presetting radio stations
Yo u can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1 Tune in the desired station (See “Listening to the
radio”).
2 Press TUNER MEMORY
ȭ
.
Preset number
3 Press +/ˋ (or TUNING + or ˋ on the unit)
ȵ
repeatedly to select your desired preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4 Press ENTER
ȸ
.
5 Repeat steps 1 through 4 to store other stations.
You c an preset up to 20 FM and 10 AM stations. e
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6 To call up a preset radio station, press TUNING
MODE
ȭ
repeatedly until “PRESET” appears, and
then press +/ˋ (or TUNING + or ˋ on the unit)
ȵ
repeatedly to select the desired preset number.
Using the Timers
e system oers two timer functions. If you use both
timers, the Sleep Timer has priority.
Sleep Timer:
Yo u can fall asleep to music. is function works even if
the clock is not set.
Press SLEEP
Ȼ
repeatedly. If you select “AUTO,” the
system automatically turns o aer the current disc stops
or in 100 minutes.
Play Timer:
You c an wake up to CD or tuner at a preset time.
Use buttons on the remote to control the Play Timer.
Make sure you have set the clock.
1 Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/ˋ
ȱ
to adjust the volume.
To start from a specic CD track or MP3 le, create
your own CD program.
2 Press CLOCK/TIMER SET
ȷ
.
3 Press Ã/Ñ
ȵ
repeatedly to select “PLAY,” and
then press ENTER
ȸ
.
“ON TIME” appears, and the hour indication ashes.
4 Set the time to start playing.
Press Ã/Ñ
ȵ
repeatedly to set the hour, and
then press ENTER
ȸ
.
e minute indication ashes. Use the procedure
above to set the minutes.
5 Use the same procedure as in step 4 to set the time
to stop playing.
6 Select the sound source.
Press Ã/Ñ
ȵ
repeatedly until the desired
sound source appears, and then press ENTER
ȸ
. e
display shows the timer settings.
7 Press ÒÄÆ
ȩ
to turn o the system.
If the system is on at the preset time, the Play Timer
will not play.
To activate or check the timer again
Press CLOCK/TIMER SELECT
ȷ
, press Ã/Ñ
ȵ
repeatedly until “PLAY” appears, and then press ENTER
ȸ
.
To cancel the timer
Repeat the same procedure as above until “OFF” appears,
and then press ENTER
ȸ
.
To change the setting
Start over from step 1.
Tip
e Play Timer setting remains as long as the setting is not canceled
manually.