Sony HCD-XG100AV User Manual

SERVICE MANUAL
COMPACT DISC DECK RECEIVER
AEP Model
UK Model
HCD-XG900AV
E Model
Australian Model
HCD-XG100AV
SPECIFICATIONS
HCD-XG100AV/XG900AV
Photo: HCD-XG900AV
Ver 1.1 2002.10
9-873-815-12 Sony Corporation
2002J0500-1 Home Audio Company
C 2002.10 Published by Sony Engineering Corporation
HCD-XG100AV/XG900AV are the amplifier,
CD player, tape deck and tuner section in
LBT-XG100AV/XG900AV.
Model Name Using Similar Mechanism HCD-XG80
CD
CD Mechanism Type CDM37M-5BD32L
Section
Base Unit Name BU-5BD32L
Optical Pick-up Name KSS-213DH
TAPE
Model Name Using Similar Mechanism HCD-XG80
Section
Tape Transport Mechanism Type TCM-230PWR42
– Continued on next page –
Amplifier section
HCD-XG900AV
Front Speaker:
DIN power output (Rated)
90 + 90 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
120 + 120 watts
(6 ohms at 1 kHz, 10%
THD)
Music power output (Reference)
200 + 200 watts
(6 ohms at 1 kHz, 10%
THD)
Center Speaker:
DIN power output (Rated)
30 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
40 watts
(8 ohms at 1 kHz, 10%
THD)
Music power output (Reference)
60 watts
(8 ohms at 1 kHz, 10%
THD)
Rear Speaker:
DIN power output (Rated)
30 + 30 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
40 + 40 watts
(8 ohms at 1 kHz, 10%
THD)
Music power output (Reference)
60 + 60 watts
(8 ohms at 1 kHz, 10%
THD)
HCD-XG100AV
Front Speaker:
The following measured at AC 120/220/240 V,
50 Hz
DIN power output (Rated)
150 + 150 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
200 + 200 watts
(6 ohms at 1 kHz, 10%
THD)
Center Speaker:
DIN power output (Rated)
35 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
50 watts
(8 ohms at 1 kHz, 10%
THD)
Rear Speaker:
DIN power output (Rated)
35 + 35 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
50 + 50 watts
(8 ohms at 1 kHz, 10%
THD)
Inputs
DJ MIX IN*:
(phono jacks) sensitivity 250 mV,
impedance 47 kilohms
GUITAR IN:
(phone jack) sensitivity 75 mV,
impedance 470 kilohms
PHONO IN:
(phono jacks) sensitivity 3 mV,
impedance 47 kilohms
MIX MIC:
(phone jack) sensitivity 1 mV,
impedance 10 kilohms
VIDEO IN:
(phono jack) sensitivity 250 mV,
impedance 47 kilohms
GAME IN:
(phono jack) sensitivity 250 mV,
impedance 47 kilohms
MD IN:
(phono jack) sensitivity 450 mV,
impedance 47 kilohms
DVD INPUT
FRONT, REAR, CENTER, WOOFER (phono jacks):
sensitivity 450 mV,
impedance 47 kilohms
Outputs
DJ MIX OUT*:
(phono jacks) sensitivity 250 mV,
impedance 1 kilohms
PHONES:
(stereo phone jack) accepts headphones of 8
ohms or more
VIDEO OUT:
(phono jack) voltage 250 mV
impedance 1 kilohm
This stereo system is equipped with the Dolby B-type
noise reduction system*.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol
are trademarks of Dolby Laboratories.

Sony HCD-XG100AV Specifications

General

Total Power Output	100W
CD Player	Yes
Radio Tuner	FM/AM
Bluetooth	No
USB Port	No
Speaker Configuration	2.0
Type	Mini Hi-Fi System
Functions	CD, Radio, Audio In

Summary

Servicing Notes

Handling Optical Pick-up and ESD Precautions

Precautions for handling optical pick-up and electrostatic discharge.

Laser Diode Emission Check

Guidelines for checking laser diode emission safely.

Chip Component Replacement and Flexible Circuits

Advice on chip components, especially tantalum capacitors, and flexible circuit board repair.

General Information

Front Panel Controls Overview

Identifies front panel controls and their functions.

Setting the System Clock

Step-by-step guide to set the system's clock.

Disassembly Procedures

Disassembly Flow and Case Removal

Outlines disassembly sequence and steps for removing the main case.

Test Modes

Reset and Delivery Modes

Procedures for cold reset, hot reset, and CD delivery mode.

AM Tuning Interval and Key Check

Switching AM interval and activating LED/display/key check modes.

Mechanical Adjustments

Precautions and Torque Measurements

General precautions, torque specs, and test tape usage for mechanical adjustments.

Electrical Adjustments

Precautions and Deck Section Adjustments

General precautions and tape deck section electrical adjustments.

CD Section Adjustments

Procedures for CD section adjustments like S-Curve, E-F Balance, and RF Level.

Diagrams and Block Diagrams

Block Diagrams

Block diagrams for CD servo, tuner/tape, main, display/key control/power supply sections.

Printed Wiring Boards

Printed wiring board layouts for various unit sections including BD, CD Motor, AUDIO, PA, etc.

Schematic Diagrams

Schematic diagrams for various unit sections including BD, CD Motor, AUDIO, MAIN, PA, SURROUND, etc.

IC Pin Function Descriptions

Detailed pin function descriptions for ICs on the MAIN board (IC501).

IC Block Diagrams

IC Block Diagrams: CD Section

Block diagrams for CD section ICs like CXD2587Q and BA5974FP-E2.

IC Block Diagrams: Panel Sections

Block diagrams for Panel FL IC (BA3830F) and Panel VR IC (NJU3716L).

Exploded Views

Notes and Case/Back Panel View

Explains abbreviations, marks, and shows exploded view of case and back panel.

Front Panel Sections

Exploded views of front panel components, parts 1 and 2.

Internal Component Views

Exploded views of chassis, CD mechanism, base unit, and tape mechanism sections.

Electrical Parts List

Notes and Component Lists

Explains notes, abbreviations, and lists ICs, Capacitors, Coils, Transistors, Resistors, Connectors, Diodes, and Fuses.