Sony HCD-XG60 User Manual

SERVICE MANUAL
COMPACT DISC DECK RECEIVER
US Model
Canadian Model
AEP Model
UK Model
HCD-XG500
E Model
HCD-XG60
SPECIFICATIONS
HCD-XG60/XG500
Photo: HCD-XG60
Ver 1.0 2001.02
9-929-577-11 Sony Corporation
2001B0500-1 Audio Entertainment Group
C 2001.2 General Engineering Dept.
HCD-XG60/XG500 is the amplifier, CD
player, tape deck and tuner section in
LBT-XG60/XG500.
Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol ; are trade-
marks of Dolby Laboratories Licensing Corporation.
Model Name Using Similar Mechanism HCD-LX6/LX50/LX70
CD
CD Mechanism Type CDM37M-5BD32L
Section
Base Unit Name BU-5BD32L
Optical Pick-up Name KSS-213DH
TAPE
Model Name Using Similar Mechanism NEW
Section
Tape Transport Mechanism Type TCM-230PWR42
AUDIO POWER SPECIFICATIONS:
(US model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
With 6 ohm loads both channels driven, from
120-10,000 Hz; rates 140 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion.
Amplifier section
Canadian model:
Continuous RMS power output (reference)
160 + 160 watts (6 ohms at
1 kHz, 10% THD)
Total harmonic distortion less than 0.07%
(6 ohms at 1 kHz, 70 W)
AEP, UK models:
DIN power output (rated) 110 + 110 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
140 + 140 watts
(6 ohms at 1 kHz, 10% THD)
Music power output (reference)
240 + 240 watts
(6 ohms at 1 kHz, 10% THD)
Other models:
The following measured at AC 120/220/240V, 50 Hz
DIN power output (rated) 150 + 150 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
200 + 200 watts
(6 ohms at 1 kHz, 10% THD)
Inputs
DJ MIX*:
(phono jacks) sensitivity 250 mV,
impedance 47 kilohms
GUITAR IN:
(phone jack) sensitivity 75 mV,
impedance 470 kilohms
PHONO IN:
(phono jacks) sensitivity 3 mV,
impedance 47 kilohms
MIX MIC:
(phone jack) sensitivity 1 mV,
impedance 10 kilohms
VIDEO IN:
(phono jacks) sensitivity 250 mV,
impedance 47 kilohms
GAME IN:
(phono jacks) sensitivity 250 mV,
impedance 47 kilohms
MD IN:
(phono jack) sensitivity 450 mV,
impedance 47 kilohms
Outputs
DJ MIX*:
(phono jacks) sensitivity 250 mV,
impedance 1 kilohms
PHONES:
(stereo phone jack) accepts headphones of 8
ohms or more
VIDEO OUT:
(phono jack) voltage 250 mV
impedance 1 kilohm
MD OUT:
(phono jacks) voltage 250 mV
impedance 1 kilohm
FRONT SPEAKER:
accepts impedance of 6 to
16 ohms
* US, Canadian, AEP, UK, and Mexican models
only
CD player section
System Compact disc and digital
audio system
Laser Semiconductor laser
(λ=780nm), Emission
duration: continuous
Wavelength 780 – 790 nm
Frequency response 2 Hz – 20 kHz (±0.5 dB)
Signal-to-noise ratio More than 90 dB
Dynamic range More than 90 dB
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength: 660 nm
Output level –18 dBm
– Continued on next page –

Sony HCD-XG60 Specifications

General

CD Player	Yes
Tuner	FM/AM
Bluetooth	No
USB Port	No
Cassette Deck	Yes
Speakers	2-Way Bass Reflex
Outputs	Headphone Jack
Dimensions (W x H x D) - Speaker	160 x 260 x 200 mm
Inputs	Audio In
Type	Mini Hi-Fi Component System

Summary

Servicing Notes

Handling Optical Pick-up and Laser Diodes

Advises on handling optical pick-up blocks and checking laser diode emission safely.

General Information and Operations

Location of Controls

Identifies front panel controls and their corresponding functions.

Setting the System Clock

Step-by-step guide for setting the system's clock time.

Disassembly Procedures

Disassembly Flow and Case Removal

Illustrates the sequential steps for disassembling the unit, starting with the case.

Front Panel and Mechanism Disassembly

Details the removal of the unit's case, front panel, and tape mechanism deck.

Board and CD Mechanism Disassembly

Covers disassembly of main boards, fan, and CD mechanism decks.

Test Modes

System Reset and AM Tuning Interval Modes

Explains cold reset, hot reset, and AM tuning interval change-over procedures.

CD Delivery and Key Check Modes

Describes CD delivery mode and activating the LED/tube all-lit key check mode.

Aging Mode for Tape Deck Operation

Outlines the aging mode for checking tape deck operation and sequence.

Adjustments and Diagrams

Mechanical and Electrical Adjustment Precautions

Lists precautions for mechanical and electrical adjustments, including cleaning and torque settings.

Head Azimuth, Tape Speed, and Level Adjustments

Details procedures for adjusting head azimuth, tape speed, and playback levels.

REC Bias and Level Adjustments

Explains how to adjust recording bias and signal levels for tape decks.

CD Section Checks and Diagrams

Covers CD section checks (S-curve, RF level, E-F balance) and provides block diagrams.

Printed Wiring Board Layouts and Notes

Provides notes on diagrams and lists locations for various circuit boards.

Exploded Views

Exploded View Notes and Case/Panel Views

Explains abbreviations and shows exploded views of the case, back panel, and front panels.

Chassis and Mechanism Exploded Views

Presents exploded views of the chassis, tape, and CD mechanism decks.

Electrical Parts List

Audio and Main Board Components

Lists audio components including ICs, capacitors, coils, transistors, and resistors.

Other Board Components Lists

Lists electrical parts for CD-R, front input, headphones, LEAF SW, MIC, PA, and panel boards.

Revision History

Revision Details

Provides information about manual revisions, including version, date, and description.