Sony HDC-P43 - Page 34

34
<KNEE>
P07
K POINT R/G/B/M: –99 to +99, 0
R, G, B, and M (master) values can be independently
set.
Absolute values are displayed in ABS mode except for
M (master).
K SLOPE R/G/B/M: –99 to +99, 0
KNEE ON, OFF
KNEE MAX ON, OFF
KNEE SAT –99 to +99, 0
ON, OFF
AUTO KNEE OFF, AUTO
POINT LIMIT –99 to +99, 0
Absolute value is displayed in ABS mode.
SLOPE –99 to +99, 0
Absolute value is displayed in ABS mode.
ABS Highlighted: ABS (Absolute) mode
<WHITE CLIP>
P08
W CLIP –99 to +99, 0
ON, OFF
ABS Highlighted: ABS (Absolute) mode
<DETAIL 1>
P09
DETAIL ON
, OFF
LEVEL –99 to +99, 0
Absolute value is displayed in ABS mode.
LIMITER [M] –99 to +99, 0
LIMITER [WHT] –99 to +99, 0 Absolute value is displayed in ABS mode.
LIMITER [BLK] –99 to +99, 0
Absolute value is displayed in ABS mode.
CRISP –99 to +99, 0
Absolute value is displayed in ABS mode.
LEVEL DEPEND –99 to +99, 0
Absolute value is displayed in ABS mode.
ON
, OFF
ABS Highlighted: ABS (Absolute) mode
<DETAIL 2>
P10
H/V RATIO –99 to +99, 0
Absolute value is displayed in ABS mode.
FREQ –99 to +99, 0
Absolute value is displayed in ABS mode.
MIX RATIO –99 to +99, 0
Absolute value is displayed in ABS mode.
KNEE APT –99 to +99, 0
Absolute value is displayed in ABS mode.
ON, OFF
DTL H/V MODE H/V, V only
ABS Highlighted: ABS (Absolute) mode
<HD DETAIL>
P11
DETAIL ON
, OFF
LEVEL –99 to +99, 0
Absolute value is displayed in ABS mode.
LIMITER [M] –99 to +99, 0
LIMITER [WHT] –99 to +99, 0 Absolute value is displayed in ABS mode.
LIMITER [BLK] –99 to +99, 0
Absolute value is displayed in ABS mode.
CRISP –99 to +99, 0
Absolute value is displayed in ABS mode.
LEVEL DEPEND –99 to +99, 0
Absolute value is displayed in ABS mode.
ON
, OFF
H/V RATIO –99 to +99, 0
Absolute value is displayed in ABS mode.
FREQ –99 to +99, 0
Absolute value is displayed in ABS mode.
INDEPENDENT ON, OFF
Selects whether to link to DETAIL.
ABS Highlighted: ABS (Absolute) mode
PAINT
Page name
Page No.
Item Settings Description