58
<USER GAMMA>
F04
READ (USB t CAM) Execute via ENTER. Reads the user gamma file from a USB drive.
PRESET Execute via ENTER. Sets the user gamma file items to the preset values
in internal memory.
FILE ID Max.14 characters Enters a comment for the user gamma file to be
written to a USB drive.
See “To specify a character string” on page 28.
CAM CODE Camera code Display only
DATE Date Display only
<LENS FILE>
F05
STORE FILE Execute via ENTER. The center marker is not included.
No. 1 to 17, 1
1 to 16: When using a non-serial lens (When using a
large lens, this setting depends on the internal
setting of the lens.)
17: When using a serial lens
NAME Changeable only when using a non-serial lens.
F NO F1.0 to F3.4, F1.7
Changeable only when using a non-serial lens.
CENTER MARKER Sets and stores the center marker position:
H POS: Increasing the value moves the position to
the right.
V POS: Increasing the value moves the position
downwards.
H POS –20 to +20, 0
V POS –20 to +20, 0
STORE Execute via ENTER.
<OHB FILE>
F06
STORE FILE Execute via ENTER. Stores the offset values of items specific to the
CCD. (No repeated store operation is necessary
even if the CCD is reattached)
<MATRIX FILE>
F07
CUSTOM PRESET
MATRIX
Stores and reads preset files:
When storing a preset file in camera memory,
specify the file number.
1
2
3
4
5
STORE FILE Execute via ENTER.
CLEAR ALL Execute via ENTER. Clears all the files.
READ (USB t CAM) Execute via ENTER. Loads five preset files from a USB drive to internal
memory.
WRITE (CAM t USB) Execute via ENTER. Writes five preset files in the camera’s memory to a
USB drive.
FILE ID Max.14 characters Enters a comment for the preset files to be written to
a USB drive.
See “To specify a character string” on page 28.
CAM CODE Camera code Display only
DATE Date Display only
FILE
Page title
PageNo.
Item Settings Description
To Next Page
Loading...
