35
Menus
PAINT Menu
<OPERATOR FILE>
15
READ (USB→CAM) ENTER to execute Reads the operator file from a USB drive.
WRITE (CAM→USB) ENTER to execute Writes the current settings of the operator file items to
a USB drive.
PRESET ENTER to execute To set the operator file items to the preset values in
internal memory
FILE ID Max. 16 characters Enters a comment for the operator file to be written to
a USB drive.
See “FILE Menu” on page 42.
CAM CODE Camera code (display only)
DATE Date (display only)
Page name
Page No.
Item Settings Description
<SW STATUS>
P01
FLARE ON
, OFF
GAMMA ON
, OFF
BLK GAM ON, OFF
KNEE ON, OFF
WHT CLIP ON
, OFF
DETAIL ON
, OFF
LVL D EP ON
, OFF
SKIN DTL ON, OFF
MATRIX ON, OFF
<VIDEO LEVEL>
P02
WHITE
R/G/B:
–99 to +99, 0
R, G, B, and M (master) values can be independently
set.
(M cannot be set for WHITE.)
BLACK
R/G/B/M:
–99 to +99, 0
FLARE
R/G/B/M:
–99 to +99, 0
GAMMA
R/G/B/M:
–99 to +99, 0
V MOD
R/G/B/M:
–99 to +99, 0
FLARE ON, OFF
V MOD ON
, OFF
D. SHAD ON, OFF
Selectable only when a lens supporting dynamic
shading is used.
TEST OFF
, SAW, 10STEP
<COLOR TEMP>
P03
WHITE
R/G/B:
–99 to +99, 0
AUTO WHITE
BALANCE
ENTER to execute
COLOR TEMP 0 K to 65535 K, 3200 K
BALANCE
–99 to +99, 0
AT W O N , OFF
SPEED 1 to 5, 4
MASTER
–3.0 dB to +12.0 dB, 0.0 dB
Page name
Page No.
Item Settings Description
To Next Page
Loading...
