59
GB
S-AIR Operations
Enjoying the S-AIR
receiver while the S-AIR
main unit is in standby
mode
(For the S-AIR receiver only (not
supplied))
You can enjoy the S-AIR receiver while the
S-AIR main unit is in standby mode by setting
“S-AIR STBY” to “STBY ON”.
Note
The POWER/ACTIVE STANDBY indicator in the
S-AIR main unit (this subwoofer) will lights up in
amber.
1 Press AMP MENU.
“LEVEL” appears on the display.
2 Press V/v repeatedly until
“S-AIR SET” appears, then
press or b.
3 Press V/v repeatedly until
“S-AIR STBY” appears, then
press or b.
4 Press V/v repeatedly until the
setting you want appears,
then press .
• STBY OFF: You cannot enjoy the
S-AIR receiver while the S-AIR main
unit is in standby mode.
• STBY ON: You can enjoy the S-AIR
receiver while the S-AIR main unit is in
standby mode or turned on.
5 Press AMP MENU.
The AMP MENU turns off.
Notes
• When you set “S-AIR STBY” to “STBY ON”, the
power consumption increases during the standby
mode.
• When the wireless transmitter is not inserted in the
S-AIR main unit, you cannot set “S-AIR STBY”.
• When the wireless transmitter is removed from the
S-AIR main unit, “S-AIR STBY” is set to “STBY
OFF” automatically.
• When you turn the system off while “S-AIR
STBY” is set to “STBY ON”, you cannot use any
buttons other than ?/1.
• The sound of the S-AIR receiver may be cut off by
operation of the S-AIR main unit.
MENU
AMP
MENU
,
V/v/B/b
To Next Page
Loading...
