66
GB
To set the speaker distance from
your listening position
1
Press V/v repeatedly until the speaker you
want to adjust appears, then press or b.
• FL DIST, CNT DIST, FR DIST,
SR DIST, SL DIST, SW DIST
Notes
• “CNT DIST” does not appear when you set
“CENTER NO” in the “SP SETUP” setting.
• “SR DIST” and “SL DIST” do not appear
when you set “SUR NO” in the “SP SETUP”
setting.
2 Press V/v repeatedly to select the speaker
distance, then press .
You can adjust from 0M 0CM to 7M 0CM.
Tip
When the Auto Calibration result is saved, you
can adjust the speakers distance in 1 cm steps. If
the Auto Calibration result is not saved, you can
adjust the speakers distance in 10 cm steps.
3 Repeat steps 1 and 2 to adjust the other
speaker distance.
To Next Page
Loading...
