Sony HT-CT800 - Wireless Subwoofer Connection (LINK); Initiating Subwoofer Pairing Procedure

46
GB
Performing the Wireless
Connection of the
Subwoofer (LINK)
Perform the wireless connection of the
subwoofer again.
1 Press HOME.
The home menu appears on the TV
screen.
2 Select [Setup] from the home
menu.
The setup display appears on the TV
screen.
3 Select [System Settings] -
[Wireless Subwoofer Connection].
The [Wireless Subwoofer
Connection] screen appears on the
TV screen.
4 Press LINK on the rear of the
subwoofer.
The power indicator of the
subwoofer flashes in green.
Proceed to the next step within 1
minute.
5 Select [Start].
The link setting starts.
To return to the previous display,
select [Cancel].
6 Complete the link setting by
following the on-screen message.
The power indicator of the
subwoofer lights in green.
• If the message [Cannot set Link.] appears,
follow the on-screen instructions.
• When [Bluetooth Mode] is set to
[Transmitter] and the BLUETOOTH device
is connected to the system, the wireless
subwoofer connection cannot be
established.
LINK
Power indicator
Notes