Sony HT-CT800 - Power Saving and HDMI Control; Optimizing Standby Power and HDMI Function Overview

49
GB
Using the Various Functions/Settings
Saving Power in Standby
Mode
Check that you have made the following
settings:
– [Bluetooth Standby] is set to [Off]
(page 55).
– [Standby Through] is set to [Off]
(page 56).
– [Quick Start/Network Standby] is set
to [Off] (page 57).
– [Remote Start] is set to [Off] (page 58).
If you agree to use the Chromecast built-in
function, [Quick Start/Network Standby]
automatically switches to [On].
Using the Control for
HDMI Function
Connecting a device such as a TV or Blu-
ray Disc player compatible with the
Control for HDMI function* by HDMI
cable enables you to easily operate the
device by a TV remote control.
The following functions can be used
with the Control for HDMI function.
• System Power Off function
• System Audio Control function
•Audio Return Channel
• One-Touch Play function
• Menu Operation by TV Remote Control
• HDMI Standby Through power saving
setting
These functions may work with devices
other than those manufactured by Sony,
but operation is not guaranteed.
* Control for HDMI is a standard used by
CEC (Consumer Electronics Control) for
allowing HDMI (High-Definition
Multimedia Interface) devices to control
each other.
Turn [System Settings] - [HDMI Settings]
- [Control for HDMI] on the system to
[On] (page 56). The default setting is
[On].
Enable the Control for HDMI function
settings for the TV and other device
connected to the system.
Tip
If you enable the Control for HDMI
(“BRAVIA” sync) function when using a TV
manufactured by Sony, the Control for
HDMI function of the system is also
enabled automatically. When settings are
Note
Note
Preparing to Use the Control
for HDMI Function