Sony HT-NT5 - Page 68

68
US
sensitivity, the operating system,
software applications, etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Abbreviation for Subband Codec
5)
Abbreviation for Advanced Audio
Coding
Front L/Front R speaker block section
Speaker system
2-way 3 speaker system, Acoustic
suspension
Speaker
Woofer: 60 mm (2 3/8 in.) cone type
Tweeter: 14 mm (9/16 in.) soft dome
type × 2
General
Power requirements
120 V AC, 60 Hz
Power consumption
On: 50 W
Standby mode: 0.5 W or less (For
details on the setting, see page 45)
[Quick Start/Network Standby] is set to
[Off] (default setting): 3 W
[Quick Start/Network Standby] is set to
[On] (all wired network ports
connected, all wireless network ports
activated): 7 W
Dimensions* (approx.) (w/h/d)
1,080 mm × 58 mm × 127 mm (42 5/8 in
× 2 3/8 in × 5 in) (without grille frame,
without wall mounting brackets)
1,080 mm × 64 mm × 127 mm (42 5/8
in × 2 5/8 in × 5 in) (with grille frame,
without wall mounting brackets)
1,080 mm × 135 mm × 80 mm (42 5/8
in × 5 3/8 in × 3 1/4 in) (without grille
frame, with wall mounting brackets)
1,080 mm × 135 mm × 80 mm (42 5/8
in × 5 3/8 in × 3 1/4 in) (with grille
frame, with wall mounting brackets)
* Not including projection portion
Mass (approx.)
3.2 kg (7 lb 7/8 oz) (without grille
frame)
Compatible iPod/iPhone models
The compatible iPod/iPhone models are as
follows. Update your iPod/iPhone with the
latest software before using with the
system.
BLUETOOTH technology works with:
iPhone 6s Plus/iPhone 6s/iPhone 6 Plus/
iPhone 6/iPhone 5s/iPhone 5c/iPhone 5/
iPhone 4s/iPhone 4
iPod touch (6th generation)/iPod touch
(5th generation)
POWER OUTPUT (reference)
130 W (at 4 ohms, 100 Hz)
Speaker system
Subwoofer speaker system, Bass
reflex
16 cm (6 3/8 in.) cone type
Power requirements
120 V AC, 60 Hz
Power consumption
On: 25 W
Standby mode: 0.5 W or less
Dimensions (approx.) (w/h/d)
190 mm × 382 mm × 386 mm (7 1/2 in ×
15 1/8 in × 15 1/4 in) (not including
projection portion)
Mass (approx.)
8.1 kg (17 lb 13 3/4 oz)
Communication system
Wireless Sound Specification version
2.0
Frequency band
2.4 GHz (2.4000 GHz - 2.4835 GHz)
Modulation method
Pi/4 DQPSK
Design and specifications are subject to
change without notice..
Subwoofer (SA-WNT5)
Wireless transmitter/
receiver section