Sony HT-XT3 - Audio Settings

24
GB
HT-XT3
4-558-561-13(1)
D:\NORM'S JOB\SONY HA\SO150002\HT-XT3 (PMRF 02)\4558561131_GB
(CEK)\050SET.fm
masterpage: Left
 [HDMI Deep Colour Output]
[Auto]
: Normally select this.
[12bit], [10bit]: Outputs 12bit/10bit video
signals when the connected TV is
compatible with Deep Colour.
[Off]: Select this when the picture is
unstable or colors appear unnatural.
 [Video Direct]
You can disable the On-Screen Display
(OSD) of the system when [HDMI1],
[HDMI2] or [HDMI3] input is selected.
This function is useful when playing a
game, you can fully enjoy the game’s
screen.
[On]: Disables the OSD. Information will
not be displayed on the screen and the
OPTIONS and DISPLAY buttons are
disabled.
[Off]
: Displays information on the screen
when you change the settings such as
selecting the sound field.
 [SBM] (Super Bit Mapping)
[On]
: Smooths the gradation of video
signals output from the HDMI OUT (ARC)
jack.
[Off]: Select this when outputting
distorted video signals or unnatural
color.
 [DSEE HX]
This function only works when [Music] is
selected as sound field.
[On]
: Upscales the audio file to a High-
Resolution Audio file and reproduces
the clear high-range sound which is
often lost (page 10).
[Off]: Off.
 [Audio DRC]
You can compress the dynamic range of
the sound track.
[Auto]
: Automatically compresses
sound encoded in Dolby TrueHD.
[On]: The system reproduces the sound
track with the kind of dynamic range
that the recording engineer intended.
[Off]: No compression of dynamic
range.
 [Attenuation settings - Analog]
Distortion may occur when you listen to
a device connected to the ANALOG IN
jack. You can prevent distortion by
attenuating the input level on the
system.
[On]
: Attenuates the input level. The
output level will decrease at this setting.
[Off]: Normal input level.
 [Audio Output]
You can select the output method
where the audio signal is output.
[Speaker]: Outputs sound from the
system’s speakers only.
[Speaker + HDMI]
: Outputs sound from
the system’s speakers and 2-channel
linear PCM signals from the HDMI OUT
(ARC) jack.
[HDMI]: Outputs sound from the HDMI
OUT (ARC) jack only. Sound format
depends on the connected device.
When [Control for HDMI] is set to [On]
(page 26), [Audio Output] is set to
[Speaker + HDMI] automatically and this
setting cannot be changed.
Audio signals are not output from the
HDMI OUT (ARC) jack when [Audio
Output] is set to [Speaker + HDMI] and
[HDMI1 Audio Input Mode] (page 27) is set
to [TV]. (Europe models only)
[Audio Settings]
Note